VIETNAM DELTA HIGH TECHNOLOGY EQUIPMENT JOINT STOCK COMPANY
Telecom

CorrosionX

Code:
Nhà sản xuất: Corrosion Technologies
Hotline: 0888183355
Purchase
 


KILLS RUST AND CORROSION WORLD'S GREATEST LUBRICANT, PENETRANT & ANTI-SEIZE SAFE ON ELECTRONICS
CorrosionX is the most advanced and effective corrosion prevention compound, lubricant and penetrant in the world! Although it may look like a typical oil-based anti-corrosion spray, CorrosionX utilizes a revolutionary technology called Polar Bonding™ that does far more than merely slow down the corrosion process like those so-called 'corrosion inhibitors'. Corrosion-X actually kills existing rust and corrosion (keeping it from spreading) and provides long-term protection against rust and corrosion on any metal surface.
CorrosionX is the only product available to the public that meets the US Navy's tough new corrosion prevention and control performance requirement MIL-PRF-81309H.
Corrosion Protection and Rust Preventive Coating
Due to Polar Bonding, CorrosionX causes common metals and metal alloys such as iron, steel, stainless steel, aluminum, copper, brass, bronze, etc. to chemically behave more like noble metals such as gold and platinum. In other words, as long as CorrosionX is present on metal, it can't rust or corrode! CorrosionX also has a dielectric characteristic, so it's safe on electronics and completely shuts down electrolysis between dissimilar metals. Use CorrosionX wherever you want corrosion control without paint or wax coatings. A light spray of CorrosionX on power heads, gensets and engines a couple of times a year will keeping them looking like new – even in saltwater and coastal environments.
A Breakthrough Lubricant
CorrosionX's unique formulation offers a multitude of advatages over conventional spray lubricants. Because it sticks to metal like a magnet, it cannot be easily displaced by pressure, friction or moisture. It lubricates under extreme loads and high temperatures. Not only does CorrosionX lubricate better, it lasts many times longer! This is especially true in outdoor, coastal and marine environments where direct exposure to rain and sea spray will quickly displace ordinary lubricants. Use CorrosionX on sheaves, hinges, locks, cable/wire rope, windlasses or any metal part needing lubrication. It is ideal for fishing reels and firearms.
An Unbeatable Penetrant
CorrosionX also penetrates faster and further than anything you've ever used. Corroded or rusted nuts, bolts or fittings can usually be disassembled within a few minutes. Even items you believe to be hopelessly seized can usually be saved and returned to service. Watch this time lapse video closely! Due to it's unique Polar Bonding characteristic, CorrosionX is such an incredible penetrant that it will defy gravity and climb straight up this 3" bolt!!
Safe On Electronics
Water and electronics don't mix. Until now, there haven't been many options for protecting or restoring electronics from moisture intrusion. CorrosionX's unique Polar Bonding Fluid Thin Film Coating (FTFC) technology displaces moisture and seals it out with a self-healing high dielectric coating. Even though the CorrosionX has a dielectric property in excess of 39,000 volts, because it forms an ultra-thin film it does not interfere with electronics or heat dissipation. A must for all marine battery terminals, and a mission critical product for drones and all Remote Control hobbyists.
Minimal Environmental Impact Product
The volatile organic content (usually abbreviated as VOC or VOCs) of CorrosionX is now ZERO. Compare that to most products in the spray lubricant category, which can be 50% or more VOC (for example, according to their current Safety Data Sheet, WD-40 is 49.5% solvent). That means CorrosionX is many times more gentle on you, your equipment and the environment.
 
 
 Appearance:
 Transparent
 Lower Explosive Limit, vol %:
 0.7
 Physical State: 
 Non-viscous liquid
 Autoignition Temperature:
 Not established
 Odor:
 Fresh scent
 Volatile by volume (%):
 22
 Color:
 Greenish-brown
 Vapor Density (Air=1) :
 >1
 Viscosity, cSt @ 40°C:
 33.2 
 Evaporation Rate (BuAc=1) :
 <0.01 
                  cSt @ 100°C:
 7.0 
 Vapor Pressure, mmHg @23°C:
 >1
 pH:
 Not applicable
 Solubility in water:
 Insoluble 
 Boiling Point/ Range:
 >400°F / 204°C
 Octanol/Water Partition: 
 Not established
 Melting Point: 
 Not established
 VOC Content g/l (%):
 180 (18)
 Flash Point:
 132°C / 270°F
 Specific Gravity @15.6°C:
 0.871 
 Method:
 Cleveland Open Cup
 Pour Point: 
 -22°F / -30°C
 Upper Explosive Limit, vol %:
 7
 Non-volatile by Volume (%):
 78

Other products

Liên hệ tư vấn
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua